Pipe repair clamps are used to repair a leaking pipe. This is basically a metal sleeve that has a flexible rubber pad on the inner side. Once the damaged area of the pipe is identified, the rubber part of the clamp is placed over it. This will be tightened with screws and nuts to keep the clamp in position sealing the area effectively.

Generally, a pipe clamp will be used when there is leakage and internal or external corrosion in the pipe. The duration for the effectiveness of the pipe clamp will depend on the extent of pipe damage as well. Before choosing a pipe, you will need to carry out a risk assessment especially in industrial situations to ensure that the cause of damage is identified and mitigated. Clamps can be temporary or permanent solutions. For temporary repair solutions you can use pin-home clamps, patch clamps and outside diameter flange type clamps. For permanent repair, you can use stand-off clamps and encircling sleeves.

A pipe repair clamp will contain the leak for several years effectively. And these are not expensive so it is a quick and easy fix for any leaky pipe. There are other pipe repair methods as well such as slip couplings, epoxy putty, plumber’s tape etc. You can simply purchase this from any shop that sells plumbing supplies. They can be bought easily from online stores as well. You can even create a homemade clamp by using the inner rubber tube from an old bicycle and a C-clamp.

But this can be a temporary fix as it won’t be as long lasting as a commercially manufactured pipe clamp. You can use pipe repair clamps on a variety of pipe materials such as plastic, copper, steel, cast iron etc. Pipe repair clamps come in stainless steel, brass, chrome, copper and plastic. Something you need to keep in mind is the amount of force you put in when tightening. If you are using the pipe clamp on a soft material, it is best not to tighten it too much as it can bend the material and damage the pipe further. There are many manufacturers of pipe repair clamps so it is best to research a little before you purchase.

If you are faced with a leaking pipe that you are not able to repair, it is best to contact a specialist as they will have the right equipment to carry out a successful repair job. You have to know if the pipe clamp you are using is able to withstand the pressure, chemical composition and temperature of the fluid that is being transferred through the pipe. However, there are some instances where pipe repair clamps don’t work. You should be able to tighten the clamp fully for it to work.

There can be areas such as elbow bends where it is difficult to tighten the clamp. This method is generally recommended for pipes that are running straight. There are different types of pipe repair clamps such as clip-in, bolt-down, three screws, two screw and single screw.